InfraDesigns

DPX-T1H1

Single combo temperature and humidity - 10ft (3m) cable - RJ-12 connector

DPX-ENVHUB4

4-port hub for DPX-xxxx sensors only; comes with mounting bracket and RJ-12-to-RJ-12 cable to connect to, and receive power from PX and EMX products.

Details

Dual contact closure - requires customer-provided Normally Closed (NC) or Normally Open (NO) switch (e.g. door open/close, door locked/unlocked, smoke present or absent). Factory default is NC. Each of the two ports (channels) can be independently set to NC or NO. RJ-12 connection to the PX/PX2 PDU. No support for water sensor. Requires firmware PX1.4.1 or higher or PX2.1.5 or higher.

Details

DPX-T3H1

Three temperature, with the middle temperature also supporting humidity (four sensors total in three sensor housings). RJ-12 connection to the PX/PX2 PDU. 13ft (4m) cable from RJ-12 to first sensor, 3ft (1m) between first and second and second and third sensor housings. Requires firmware PX1.4.1 or higher or PX2.1.5 or higher.

Details

We are here to help

DPX-WSC-70-KIT

DPX-T1H1

DPX-ENVHUB4

DPX-CC2-TR

DPX-T3H1