|
DPX-T1 |
Single temperature - 10ft (3m) cable - RJ-12 connector |
59$ USD
|
Détails
|
|
|
DPX-T1H1 |
Single combo temperature and humidity - 10ft (3m) cable - RJ-12 connector |
125$ USD
|
Détails
|
|
|
DPX-T2H2 |
Dual combo temperature and humidity sensors - 10ft (3m) cable length from RJ-12 connector to combined temperature/humidity sensor and additional 10ft (3m) between additional combined temperature/humidity sensor (total length 20ft/6m) |
175$ USD
|
Détails
|
|
|
DPX-T3H1 |
Three temperature, with the middle temperature also supporting humidity (four sensors total in three sensor housings). RJ-12 connection to the PX/PX2 PDU. 13ft (4m) cable from RJ-12 to first sensor, 3ft (1m) between first and second and second and third sensor housings. Requires firmware PX1.4.1 or higher or PX2.1.5 or higher. |
225$ USD
|
Détails
|
|
|
DPX-CC2-TR |
Dual contact closure - requires customer-provided Normally Closed (NC) or Normally Open (NO) switch (e.g. door open/close, door locked/unlocked, smoke present or absent). Factory default is NC. Each of the two ports (channels) can be independently set to NC or NO. RJ-12 connection to the PX/PX2 PDU. No support for water sensor. Requires firmware PX1.4.1 or higher or PX2.1.5 or higher. |
45$ USD
|
Détails
|
|
|
DPX-T1DP1 |
Differential air pressure, 10ft (3m) cable, RJ-12 connector |
399$ USD
|
Détails
|
|
|
DPX-AF1 |
Single airflow sensor, 10ft (3m) cable, RJ-12 connector |
299$ USD
|
Détails
|
|
|
DPX-WSF-KIT |
Floor water (leak) sensor plus contact closure sensor, RJ-12 connector |
99$ USD
|
Détails
|
|
|
DPX-WSC-35-KIT |
11.5ft (3.5m) rope water (leak) sensor plus contact closure sensor, RJ-12 connector |
299$ USD
|
Détails
|
|
|
DPX-WSC-70-KIT |
23ft (7.0m) rope water (leak) sensor plus contact closure sensor, RJ-12 connector |
399$ USD
|
Détails
|
